8ZED Projecta Battery Charger - 12 Volt, 25 Amp
7 Stage Charging
Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers
The multi chemistry function allows you to set the charging profile to suit the battery’s chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life..
Intelli-Charge allows you to adjust and select the charge rate from as low as 2 Amps to best suit the size of your batteries.
The smaller models (7,10, 15A) can be used as a power supply which is great as a memory saver when changing your vehicle battery so you don’t lose important radio and computer information. You can also Run 12V appliances direct from the battery clamps up to the rated output current, ideal for use around the house.
User Friendly Controls
All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger’s performance. What’s more, the chargers remember the last settings used even when the power has been turned off.
LCD Display & Remote Control
Control and monitor the charger’s performance from a remote control display, allowing the charger to be mounted out of the way and out of sight. The battery charger and remote are synchronised for operation either locally or by remote.
The temperature sensor monitors the battery temperature and adjusts (compensates) the charger’s output to prevent overcharging. This is ideal for batteries used in warmer climates or environments.
Short Circuit Protection
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode.
Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Shock Proof & Dust Proof
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard.
In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
2 Year Warranty
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
|MINIMUM START VOLTAGE||2.5A|
|DESULPHATION||High Frequency Pulse charge up to 11V|
|SOFT START||Half the rated set current up to 12V|
|BULK||Set current up to:
|ABSORPTION||Constant voltage until current drops to:
2 Amp settings: 0.3A
6 Amp setting: 0.9A
12 Amp settings: 1.8A
25 Amp settings: 3.75A
|EQUALIZATION||Contact current (2.0-3.75A) up to 16V then hold for 1 hour or 12 hour timeout|
|ANALYSIS||Monitors battery for 90 sec|
|RECONDITION||Contant current (0.3-3.75A) for 4 hours limited to:
|TYPES OF BATTERIES||Most types of lead acid batteries including GEL, AGM, WET CELL and CALCIUM|